Drag site icon to your taskbar to pin site. Learn More

The Thing - 1954 Twin Knucklehead Drag Bike

Tuesday, June 29, 2010
The twin Knucklehead dragster made a name for itself on the drag strips of Northern California and the dry lake beds of Nevada and the Mojave Desert.
The twin Knucklehead dragster made a name for itself on the drag strips of Northern California and the dry lake beds of Nevada and the Mojave Desert.
Check out the flat-out  Superman-style riding position. Howd you like to be spread out like this doing 140+mph in the quarter-mile
Check out the flat-out, Superman-style riding position. How'd you like to be spread out like that doing 140+mph in the quarter-mile?
Gentleman  start your engines. Bozzie and The Thing used to raise some hell on the drag strip  racing cars and motorcycles alike.
It built its legend on the New Jerusalem and Kingdon Drag Strips in Tracy and Lodi, California. Nothing on the strip could touch it. The big shots in their hot rod cars refused to race it. The crowd loved it. ‘The Thing’ is the only one of its kind, a dual Knucklehead drag bike that was running high 8-second and low 9-second runs at over 140 mph in the quarter-mile back in the 1950s. On dry lake runs in Reno and the Mojave Desert, ‘The Thing’ is claimed to have broken the 200 mph barrier in a flat-out run. It was so fast that sometimes the old air hoses that tripped the clock at the end of the race wouldn’t register it blowing by.

To launch ‘The Thing,’ John Bozzie, would lay straight out on the seat pad that stretched out over the tank, arms reaching for the low handlebars used to complement the flat-out riding position. The clutch pedal was mounted on the right rear, and with the stiff springs the drag bike had on it, Bozzie would have to push on the bars as hard as he could to get the clutch in. Once he let the clutch out, they used a feeler button on the bars to shift it. There was a conventional hand gear shifter to the left of the tank, but the way this ‘Thing’ pulled, it was nigh impossible to fight the g-force created by its acceleration. Basically Bozzie would take off in second gear, and then shifted into high because it had the horsepower to pull it. Then it was a matter of playing with the throttle to make sure the tires didn’t spin too hard to get all the traction he could out of it. It had so much horsepower it’d leave a black line a solid quarter-mile. After races, Bozzie and his partner Walter Ross would walk out on the track and they could see where he had shifted because there’d be a little clean spot. Bozzie could tell how clean he’d shifted because if there wasn’t more than a foot-and-a-half patch, then his shifts were spot-on. You could tell how many runs he had made that day by how many black lines there were in the quarter-mile on the track.

The drag scene in the 1950s was raw and unrefined. The crowd stood trackside with no walls between them and the racers. There were no Christmas tree lights. A flagger started the races. An air hose, like the one that rings the bell when you pull into a gas station, tripped the clock. This was long before they started using the eye beam. Even when they switched to the eye beam, sometimes those wouldn’t register ‘The Thing’ either because of the chrome air cleaners messing with the beams. In that era, everybody was trying to do something different. Back then, racers did what they wanted to do. They didn’t have to wear helmets. Some of them used to wear bathing suits to race in. You’d see some of the craziest things running there.

‘The Thing’ came about when John Bozzie met Walter Ross at Claude Salmon’s Harley-Davidson in Oakland, California. Bozzie was already establishing a reputation for racing a Triumph on the New Jerusalem Airstrip and for setting speed records on a single Knucklehead drag bike at the Reno Dry Lake Races. Ross was a foreman at Claude Salmon’s Harley-Davidson over in Oakland, where Bozzie had recently been hired on. One day Ross went out with Bozz to Kingdon and race organizers shut the track down on them because they refused to run
Back in the day The Thing was so fast  the hot rod car guys refused to race it on the drag.
Back in the day,'The Thing' was so fast, the hot rod car guys refused to race it.
against a motorcycle. It was a big rivalry between cars and motorcycles back then. The car guys packed up their trophies and went home, pissing and moaning that the bike wasn’t a dragster. So Ross and Bozzie went back to the shop and built ‘The Thing’ and brought it back out to Kingdon and said “Now it’s a drag bike. You can’t argue that it’s not a dragster.” After that, nothing on the strip could touch them. The car guys stopped racing bikes not long after that.

Bozzie and Ross spent many hours in Claude Salmon’s Harley-Davidson shop working on ‘The Thing.’ The engines are both 1947 Harley-Davidson 74 cubic-inch overhead valve FL models with a standard bore and stroke. Sourcing the iconic Knucklehead engine only adds to ‘The Thing’s’ mystique. And this bike’s got two of them. The engines have polished and ported heads and oversized valves. It uses high compression pistons with a 9.25:1 ratio, fed by four model M-88 carburetors, one carb per cylinder. Bozzie and Ross also used pressure-lubricated roller bearing lower ends and reworked high pressure oil pumps. The chain-driven drag bike uses a custom primary set-up that the two came up with that is still a ‘half-assed’ secret to this day because nobody can figure out how they got them to run together. It has a standard coil ignition, something seldom seen on other drag strip racers of the era. The stretched-out frame sports an incredible 85-in. wheelbase.

Both the clutch and brake levers are mounted on the rear axle. Its ultra-long clutch lever linkage extends down the right side to the rear axle. It has mechanical brakes, with no hydraulics at all. Bozzie said the best brakes on that ‘Thing’
The Twin Has Ponies was the title of a two-page spread on The Thing in CYCLE magazine. The Thing was featured on the cover of CYCLE magazine in 1954 before it had even run a race.
'The Twin Has The Ponies' was the title of a spread CYCLE magazine ran on 'The Thing'
in 1954 before it had even run a race.
were the engines. He’d run on the front brake until it stopped grabbing and then he’d lay on the rear brake, going back and forth, but said “you never could absolutely stop it.”

A Harley-Davidson school was being held at Claude Salmon’s and one of the attendees was Walter Davidson. One afternoon when Bozzie and Ross were putting new cylinders on ‘The Thing,’ Davidson came by. Impressed by their work, he said that H-D would sponsor them if they could hit 200 mph. They looked at Davidson and said “We’ve already been 200 mph on this bike. Take us over to Bonneville and we’ll give you 200 mph on this thing.” Unfortunately, H-D wasn’t into sponsoring that type of racing much and didn’t take them up on their offer.

Among the many memories ‘The Thing’ fostered, one of Ross’ favorite stories was one race where they took the bike to Reno. After piloting the first run, Bozzie warned him that it was a short track, so Ross was thinking “maybe it’s around 7/10 of a mile or so, short of a full mile, so I’ll just get it up to speed and shut it down.” A blown motor in the front engine on the first run meant they had to jury rig it so they could get in a double run, basically running on three cylinders. Ross piloted it for the second run and found out the hard way what Bozzie meant by a short track when his run was so fast he quickly ran out of room and couldn’t get it stopped in time. As he rolled out of the throttle, the bike settled a bit running around 164 mph. Ross gave the bars a little shake which flips the bike into a slide at around 120 mph. As he comes back on the throttle, the bike swings around, facing in the complete opposite direction toward the pits, so Ross just rolled it slowly back to the staging area. Getting off the bike, Ross tells Bozz, “Don’t you ever do that to me again. Next time you make yourself clear what is short.”

Even to this day, people’s reactions to ‘The Thing’ are nuts. A few years back, Bozzie’s son Dave, owner of Bozzie Custom Performance, restored the bike, machining many of the parts that had gone missing or worn out over the years.
John Bozzie works his mastery to get the maximum performance out of almost any engine.
John Bozzie was a master at getting the maximum performance out of almost any motorcycle engine.
He and his father took it to Reno, Nevada for the Street Vibrations show. Dave said it was absolutely insane. He’d pull up to a stoplight and everyone would mob the bike, standing between the trailer and the truck. They stopped at one light and a cop who was writing a ticket stopped what he was doing and set his ticket book on top of the car so he could come over and check it out. Dave had to push his way through the crowds just to get the bike off the trailer. They also took it to the annual Kingdon Reunion, returning to one of the first tracks the twin Knucklehead Harley ran on 50 years later as ‘The Thing’ came full circle. There, many people approached the Bozzies saying, “I remember that bike when I was 12-years-old.”

After Dave restored ‘The Thing’ to its former glory, he believes the bike’s still ready to compete and could push 200 mph today. His 80-year-old father John wants to make one final glorious sprint down the Salt at Bonneville, where it never got an opportunity to run before. But he is quick to remind his dad that it does have a 1947 chassis. It currently sits in Dave’s shop, Bozzie’s Custom Performance, but they have considered one day donating it to a motorcycle museum. They’ve talked about offering it to the fabulous Harley-Davidson Museum while John is still alive so that he could see where it would sit for posterity’s sake.

There were actually two similar twin Knucklehead drag bikes from that era as Bud Smith built a motorcycle called the ‘Green Monster.’ But back then the two were
The Thing was rebuilt a few years back by Johns son Dave of Bozzie Custom Performance. Dave machined many of the parts that had either fallen off or worn out.
'The Thing' was rebuilt a few years back by John's son Dave of Bozzie Custom Performance. Dave machined many of the parts that had either fallen off or worn out. The AFT Customs girls also breathe new life into the venerable drag bike.
competing on circuits in different parts of the country and they didn’t have the means of communication like we do today. They both knew there was another bike out there, but it was spread by rumors and word-of-mouth. In 2007, Bozzie and Smith ran into each other at Bonneville. When they got talking about it at the Salt Flats, they discerned that Bozzie was the very first to build one. Both, though, are pioneers of the sport.

There will never again be a racing era like the drag scene of the ‘50s. They didn’t win money, they just won a trophy. Bozzie would take the trophy one time and Ross would take it the next. It was just a bunch of guys out having fun who did it for the love and spirit of it. It gave them a chance to hang out and run their bikes. Everybody knew everybody so there was a strong sense of camaraderie. You could see a guy’s art in the bike as they stamped their signature on them with their craftsmanship. ‘The Thing’ was born because two guys just wanted to race and have fun. But because of its historical significance and the free spirit that brought it to life, ‘The Thing’ and pioneers like John Bozzie and Walter Ross deserve their legacy to be preserved in the annals of the Motorcycle Hall of Fame.
The Thing Twin Knucklehead Gallery
View Gallery
View Gallery
View Gallery
View Gallery
View Slideshow
Cruiser Custom Motorcycles Features
British Customs Vintage Vendetta Speedmaster
British Customs designs and builds custom aftermarket parts for Triumph Motorcycles, resulting in beautiful examples like Vintage Vendetta, a reimagined Speedmaster.
Lucid Kustoms 1982 Brute Wing Cafe Racer
Lucid Kustoms gave renewed life to a worn-out 1982 Honda Gold Wing, rebuilding the motor and stripping all that wasn't completely necessary to create the '82 Brute Wing café racer.
Jever Beer Harley Blackline by Thunderbike
Jever Beer commissioned Thunderbike Customs to build a Harley Blackline for it, the bike the result of a Facebook design challenge that will be given away in a Jever promotion.
Big Pimpin Cycles Lizard King Tribute Bike
Brian Hubbs of Big Pimpin' Cycles pays homage to The Doors frontman Jim Morrison with his "Lizard King" a custom 1983 Honda CV650SC Nighthawk he picked up originally for $250.
Fairless Victory - Allstate Sweeps Vegas 8-Ball
Rick Fairless and the Strokers team put its custom spin on a Victory Vegas 8-Ball for this year's Allstate Motorcycle Sweepstakes grand prize, the package including a custom paint job and trip to Dallas to meet Rick.
Venier Customs Moto Guzzi V35c: Diabola
Stefano Venier of Venier Customs turned heads with his first build three years ago, a reimagining of the 1987 Moto Guzzi V35c which he named "Diabola."
Sarah Lahalihs 2013 Triumph Scrambler
Sarah Lahalih has a wide and varied life in the motorcycling industry, but she recently took on the role of custom builder with a 2013 Triumph Scrambler project named "Lahalih-Wood."
Klock Werks Thunderbird Storm Cafe Racer
Leave it to Brian Klock and the creative crew at Klock Werks Kustom Cycles to strip down a Triumph Thunderbird Storm and convert it to a 1700cc café racer.
Greg Hatcher  MNNTHBX and the Honda Ruckus
Greg Hatcher is the founder and creative force behind MNNTHBX, an aftermarket parts manufacturer specializing in the Honda Ruckus and Grom.
Custom Build: ICON Triumph Speedmaster
ICON looked to embody the raw, unconstrained spirit of vintage drag racing in a contemporary Triumph Speedmaster for its latest custom build.
Chappell Customs 1981 SR500 Cafe Racer
A stock 1981 Yamaha SR500 isn't likely to make anyone's pulse race, but this custom café racer from Chappell Customs isn't your everyday SR...
Deus Ex Machina Boodaak   Dakdaak
Michael Woolaway operates out of the Deus Ex Machina Emporium of Postmodern Activities in Southern California, and two of his newest custom builds are Boodaak and Dakdaak, a pair of super single café racers.

Login or sign up to comment.

Comments
hogginhud   August 2, 2013 09:56 AM
Walter Ross was one of the most respected and innovated Harley mechanics in his day. He customized the dual Linkerts on my drag knucklehead by machining adjustable high speed jets that came up from the bottom of the bowl. Ross had a drag sportster himself that he raced into his sixties!
zinfella   June 19, 2011 09:50 AM
I remember The Thing, and it's unique roller platform that was shaft connected to the jacked up left rear wheel of an Olds, that was used to start it. Something else that the article doesn't mention is that The Thing used nitrous oxide, which at that time was known as "Second Wind". Kingdon was my home strip, since I lived in Stockton.
g.e. mahone -Spiderman  July 25, 2010 03:43 PM
John get your head out of the hole you have it stuck in. Does Spiderman ring a bell. In the nhra All v twins are 2700cc and the jap bikes are 1570cc. The v twins are fuel injected and the jap bikes are carb. AS for naturally asperated, I would like to have a dollar for all the times I,ve heard that whine. Ray Price does,nt want none of the Spider.If so bring your money and come.
John -Worlds Fastest naturally asperated Motorcycle  July 17, 2010 04:34 PM
I'd like to add to answer the nitwit tim, that the Worlds Fastest Drag Motorcycle is owned by Ray Price and ridden by Joey Sternotti.A Single engine Harley Davidson burning nitromethane that ran a 6.144 at 234.37 quarter mile. That is against 4 cylinder nitro burning jap bikes of any motor size they want to run.
John -milwakee mike  July 17, 2010 10:39 AM
milwakee mike, people like tim use "outdated" as thier argument because they're not smart enough to debate any other way. My favorite form of spectator sport is Harley Drag Racing because seeing motors that idiots like him disregard out of hate run low 6's at 220mph is fantastic.
javajoe -fool for old school  July 6, 2010 09:15 PM
great article!!! i love stuff like this.. i'm a fool for old school and wherever i go with my "outdated" shovelhead, i draw far more attention than the guys with the cookie cutter evo's, twin cam, and metric cruisers.. and guess what? i've got an '08 fatbob that i really like but it lacks the character of the older chain driven shovelhead.. this story is right on the heels of "the world's fastest indian".. good job bryan and keep digging up those old iron stories..
milwaukee mike -Tim B  July 3, 2010 10:55 AM
Thank you for being this furoms human "spell check".

But I guess you really missed the point. By the time the Double-Knuckle set those records, HD had superseded that motor with the "Pan Head" motor. Two "outdated motors" setting records far until the seventies, when a three engined, highly modified modern enginede drag bike finally got beat.

So Tim B, what is your point? HDs outdated?,...think again (and use what brain cells you may have left,...cause you must have bumped your head).

Tim B -"milwakee mike"  June 30, 2010 08:09 PM
It's funny you spelled it milwakee. Too bad you didn't slip a "c" in there and make it milwackee!

Anyway, all Harleys, even those from the 2011 model year, are outdated so I'm not sure what your point is.
milwakee mike -dual Knucks  June 30, 2010 02:56 PM
That was way back in the fifties.
It wasn't until the seventies that Russ Collins could beat that dual HD dragbike. And he had to use three extremely modified Honda 750 motors. It was called "The Attichson, Topeka, and Santa Fe".

Just shows even outdated HDs can set the standards and records that stand for twenty years.