2013 BMW HP4

2013 BMW HP4
MSRP $20,525

The BMW HP4 is full of horsepower and is named for the high performance output. It has a 4-cylinder 4-stroke engine with four titanium valves per cylinder, and is water and oil cooled. It can get up to 200 miles per hour and holds 4.6 gallons of fuel. It has DDC (Dynamic Damping Control) semi active suspension, launch control for optimal acceleration, an Akrapovic full titanium exhaust, Seven-spoke forged aluminum wheels in gloss black, Radial Brembo Monobloc brake calipers, Race ABS with new IDM calibration, DTC (Dynamic Traction Control) with new 14-step adjustability and Gear shift assistant.

Engine TypeIn-line 4-cylinder 4-stroke engine, four titanium valves per cylinder
Engine Displacement999cc
Bore Stroke80 mm x 49.7 mm
CoolingWater/Oil Cooled
Compression Ratio13.0:1
Fuel SystemElectroinc injection, digital engine electronics with integrated knock control
Starting SystemElectric
TransmissionConstant-mesh 6-speed gearbox, straight-toothed
Final Drive17/45 chain; Shift Assistant clutchless upshifting under acceleration; Launch Control
Rake TrailNA
Seat Height32.3 in.
Wheelbase56 in.
Front SuspensionUpside down telescopic fork Ø 46 mm, dynamic damping control DDC
Rear SuspensionAluminium dual swing arm, dynamic damping control DDC (central spring strut)
Front BrakeTwin disc brake, floating brake discs nine bearings, 4 piston monobloc fixed caliper
Rear BrakeSingle disc brake, single piston floating caliper, diameter 220 mm, 5 mm thick
Front Tire120/70ZR-17
Rear Tire200/55ZR-17
Fuel Capacity4.6 gallons with approximately 1.0 gallon reserve
Dry Weight439 lbs. (Wet)