Drag site icon to your taskbar to pin site. Learn More

2012 Honda CRF150R Expert Project Part 2

Wednesday, April 25, 2012
Hello mini moto junkies, and welcome back for Phase 2 of our Honda CRF150R Expert project bike. In case you missed it, we did a full review of the new for 2012 Honda mini thumper a few months back and came away very impressed with the changes Honda has made to the 150R. Although the bike was very good in stock trim, we couldn’t help wanting to make it even better and have since been embellishing the little ripper with some of the coolest aftermarket products available.

Videos Our Sponsor
Honda CRF150R Expert Project Bike Part 2 Video
Click to view video
Check out the upgrades to our mini-class racer in the 2012 Honda CRF150R Expert Project Part 2 Video
In Part 1 of the project we focused on the ergonomics and improving the durability of the parts most susceptible in a crash. We started things off with a set of ProTaper 7/8” SE bars and also included a ProTaper Aluminum Throttle Tube. To compliment our new bars, we then added a set of ProTaper MX Pillow Top Lite Grips. Finishing off the hand controls, and ensuring we wouldn’t have to deal with any broken levers, we threw on a set of Sunline V1 MDX unbreakable levers and also included Sunline’s SL-4 clutch assembly for easy on-the-fly adjustment. To complete our first batch of upgrades we moved our attention to the foot controls. While the stock pegs were ok, we wanted a little larger platform and more grip. ProTaper helped us out once again with a set of their S.P.I. 2.3 platform pegs. For more information and our opinions on these products, be sure to read the full 2012 Honda CRF150RB Project Part 1.

With the bike controls up to par, we are now ready to focus on the bike’s drive components and getting the power to the ground. Most of the components in this phase are high-wear items that needed to be replaced after a couple months of testing anyway, but also benefit the performance of the bike and are a definite improvement over the stock parts. 

Kenda K775 Washougal Intermediate Front Tire
Kenda K775 Washougal Intermediate Rear Tire
$74.95 - Rear
$76.95 - Front



The Kenda Washougal tires provide great traction in corners,
particularly the front tire. The set has excellent wear resistance.

Residing in the Northwest, we couldn’t help but try out a tire named after one of our favorite tracks. Washougal is well known for its tricky, and ever-changing dirt. A morning practice session starts off with deep loam, and often mud, but by afternoon the track dries out and packs down into a very hard and slippery surface. Since we were testing at a wide variety of tracks that range from sand to hard-pack, the K775 sounded like the perfect choice.

After a couple months of use, we came away very impressed with this intermediate terrain tire. We found that the Kenda K775 Washougal Intermediate front tire and Kenda K775 Washougal Intermediate rear tire hook up extremely well in the soft terrain, whether its sand or mud, yet still performs well on hard pack. Our mini test pilot reports increased grip, especially from the front, which has really inspired a lot more confidence in the corners. Most impressive, for the cost-conscious racer, is the long life of the tires. We have logged extensive hours on the Kendas and they show very minimal wear.

ProTaper 420 Rear Sprocket
$64.95

Stock gearing on our 150 Expert was a little tall for most of the tracks we were riding and could be improved by adding a tooth to the rear. Since the stock steel sprocket was starting to show some wear, we opted to replace it with a ProTaper aluminum sprocket. The added tooth made our little CRF a little quicker out of the corners and still has plenty gearing left up top for those high-speed sections.

The ProTaper rear sprocket is CNC machined from 7075-T6 heat-treated aluminum and shaves serious weight compared to the steel cog it replaces. ProTaper claims its proprietary mud groove design results in 44% more tooth surface area which increases the life of the sprocket dramatically. It appears the sprocket is living up to this claim as our sprocket is showing very little wear after months of use. ProTaper offers the sprockets in either a black or magnesium anodized finish. 

Going up one tooth in the rear helped get our CRF better drive off the corner, but it still has enough top-end to handle high-speed sections. The ProTaper gold chain looks great and a Hammerhead case saver protects without clogging with mud.

ProTaper 420MX Chain
$34.95

With a new, bigger sprocket needed in the rear and our stock chain stretched out quite a bit, upgrading the drive chain was a no-brainer. We opted to stick with ProTaper to maximize compatibility by purchasing their 420MX gold series chain. The gold series chain is very lightweight, but also maintains a 5000-pound tensile strength due to its premium chromoly construction. While you can improve chain life with an O-ring chain, we opted to stick with the traditional to reduce drag and keep our little CRF producing as many ponies as possible. Our ProTaper chain stretched out a bit at first, but has now settled in and very rarely needs adjusting.

ProTaper 420 Front Countershaft Sprocket
$25.95

While we didn’t require any gearing change up front, it’s always a good idea to use a new sprocket when replacing the chain. Again, to keep things consistent, we again chose ProTaper in the stock 15T size. While there is not a lot of difference in countershaft sprockets, ProTaper does use drilled holes to keep the weight down, and like the rear, utilizes self-cleaning mud groves to prevent dirt build-up. Also, ProTaper claims a special coating over the cro-moly steel helps retain strength and adds life. 


One of our test tracks was Racetown 395, which has a nice mix
of fast sections, big jumps and excellent dirt.

Hammerhead Designs, Inc. Case Saver
$34.95

After installing a new chain and sprockets, the last thing you want to do is compromise the life of your new purchase. Conditions can get pretty wet up here in the Northwest and the stock countershaft guard easily packs full of mud, causing a lot of unwanted wear on the chain. Simply removing the stock case guard would eliminate the potential for packing in mud, but leaves the case extremely vulnerable should you ever throw a chain.

To solve this problem we opted to install a Hammerhead Designs case saver. The case guard is CNC’d from 6061-T6 billet aluminum and provides an extremely light, yet very strong guard just in front of the countershaft sprocket. The Hammerhead guard is designed only to protect the engine case, exposing the countershaft sprocket completely by eliminating any type of side coverage. This is great for eliminating mud build up, but be careful to keep your fingers away from this area when the bike is running, as you are now vulnerable to loosing a digit if your fingers ever get too close. The Hammerhead Case Saver is extremely easy to install, and for our Honda, was available in anodized red.



CV4 Radiator Hose Kits
$86.99 

Our final upgrade for phase two was a CV4 Radiator Hose Kit. With a wide assortment of colors, the CV4 kit definitely adds some cool factor to your ride, but at the same time, they also provide some performance improvements. The CV4 hoses are constructed of pure silicone with polyester reinforcement. They are able to withstand temperatures up to 420 degrees and unlike OEM hoses, they resist U.V. deterioration. They also utilize a smoother inside diameter, which allows for increased coolant flow.

The CV4 hoses come in enough colors to match any bike and they eliminate the Y connectors on some models. We found installation to be simple and the length and bends of our CV4 hoses matched up perfectly with the stock hoses.

The CRF150R Expert has become an excellent race machine and will help ease the jump to the bigger 4-stroke bikes.
We experience a tight seal at all of the connections and have had no problems with leaks, punctures or any color fading.

Conclusion

That wraps up the upgrades for Phase 2 of our CRF150R project bike. The high-wear parts we focused on for this stage are now fresh and ready for more testing abuse. Our little CRF continues to run flawlessly and we have yet to experience any mechanical trouble. The 150R Expert is a competent race bike that has been a blast to ride. It also helps get our young rider familiar with the power characteristics of a 4-stroke. He’ll be jumping to the 250F class eventually and the Honda has been a good way to introduce the Thumper breed. Now that the weather is turning around and the CRF is better than ever, we’ll be out pounding even more laps.

For more information or to purchase these products, or other parts and accessories for the 2012 Honda CRF150R Expert, visit Motorcycle-Superstore.com.
Videos Our Sponsor
2012 Honda CRF150R Project Bike Phase One Video
Click to view video
2012 Honda CRF150RB Project Gallery
View Gallery
View Gallery
View Gallery
View Gallery
View Slideshow
Recent Dirt Bike Reviews
2015 Yamaha YZ450F First Ride
After re-inventing the wheel five years ago, Yamaha gets back to the basics with the latest iteration of its YZ450F motocrosser.
2015 Suzuki RM-Z250 First Ride
Suzuki continues to campaign its three-year-old RM-Z250 in the 250 motocross class. We put the trusty yellow bike through its paces in this dirt bike review.
2015 Suzuki RM-Z450 First Ride
Suzuki continues to hone its tried-and-true RM-Z450 motocrosser. Three-time X-Games Gold Medalist Vicki Golden gives us her take.
2015 Honda CRF250R First Ride
Honda targets the suspension and power delivery of its 2015 CRF250R motocrosser. But do the updates equate to a improved 250 MX package?
2015 Yamaha YZ250F First Ride
Following a year of significant updates in 2014, Yamaha opts for some subtle changes on its 2015 YZ250F. Do the tweaks help make the machine stronger on track? Check out this first ride to find out.
Recent Project Bike Articles
Cheap Track Yamaha R6 Project - Part I
MotoUSA contributing editor Neale Bayly happens on a lightly crashed 2005 Yamaha R6 - an ideal platform upon which to build into an affordable, real-world trackday bike.
Harley XL Super Sport Wind Deflector Review
Looking for a little relief from windblast on the freeway, we threw on an XL Super Sport Wind Deflector on our 2004 Sportster project bike.
2014 Kawasaki KX250F Project Bike
We continue to rack up the hour meter around tracks and trails on our long-term Kawasaki KX250F motocross bike with some interesting results.
H-D XL Slotted 6-Spoke Billet Sprocket Review
After a snapped belt threw a wrench in our progress, we dig back in to our 2004 Sportster 1200 Custom project by installing a Harley-Davidson Slotted 6-Spoke Billet Sprocket and a new belt.
Honda Dirt Bike Dealer Locator

Login or sign up to comment.