Drag site icon to your taskbar to pin site. Learn More

Shoei CW-1 Pinlock Visor Review

Thursday, April 26, 2012
Seeing where you’re going, well, that’s a fairly important thing when riding a motorcycle. A fogging faceshield is, at best, a nagging distraction. And we can attest that many a morning commute to MotoUSA’s Southern Oregon HQ has been hampered by a fogged up visor. That was before we started using the Shoei CW-1 Pinlock Visor.

Shoei CW-1 Pinlock Visor
The Shoei CW-1 Pinlock Visor delivers fog-free vision to riders using the company's latest generation full-face helmets: the RF-1100, Qwest and X-Twelve.
Derek Arnold developed the Pinlock concept three decades ago in the Netherlands. It is a simple, yet effective, anti-fog system. It comprises of two pins, which are bored into the opposing ends of the interior of a motorcycle helmet faceshield. These two pins anchor a fog-free Pinlock lens insert, one side of which in encircled by a small bead of silicone. Two grooves at the ends of the lens hook into the pins and tension presses the silicone against the inside of the faceshield. The sealed air trapped in the middle act as an insulating barrier, eliminating condensation. It’s the same principle at work in a modern dual-pane window, only inside a rider’s helmet.

Regardless of how it works, there’s no doubting that it does work. And while the motorcycle helmet was the first application, Pinlock has since marketed the technology for a broad range of applications – like fog-free shields for the military and emergency services. A more prominent technology in its domestic European motorcycle market, Pinlock systems have since migrated across the pond in past decade and are becoming more common stateside.

Having long considered testing a Pinlock visor, I was deterred by the inconvenience of manual installation. Initial Pinlock kits were DIY projects, requiring consumers to carefully measure and drill holes into stock shields. Thankfully, for the installation-impaired, a number of helmet brands offer accessory visors with pre-installed Pinlock mounts – like the Shoei CW-1 Pinlock. (Some of the latest generation high-end touring lids in the US, like the new Shoei Neotech, feature Pinlock visors as standard kit.)

The Shoei CW-1 Pinlock shield is interchangeable on the Japanese brand’s latest generation full-face lids, and I utilized it on both my RF-1100 and Qwest helmets. Installation of the interior lens insert is quite simple, just press the faceshield down flat enough to wedge the edges under the pinlocks. Let go and the flex of the hard shield squeezes the lens into place. Pop the shield back in the helmet and you’re good to go.

Shoei CW-1 Pinlock Visor Clear
Shoei CW-1 Pinlock Visor Dark Smoke
The CW-1 Pinlock Visor holds an interior lens available in multiple tints including: clear, yellow, amber, light & dark smoke.
Test a Pinlock system and it’s immediately obvious why they are becoming more prominent – they are completely effective at eliminating fog. My entire riding season was fog-free. And this includes oodles of cold, damp rides courtesy of MotoUSA’s Pacific Northwest climate. As long as the seal between the shield and lens is secure, the faceshield will not fog.

On one isolated instance I did note a sliver of condensation in one corner, on the periphery of my sightline. I suspect there may have been a slight gap in the seal, from jostling the inner lens somehow, or not hooking it securely underneath the Pinlocks. Closer examination revealed nothing amiss, and once re-installed I couldn’t replicate the fog leak again.

The Pinlock system isn’t without some drawbacks. Doubling up the lenses raises valid concern about optical clarity. While visual distortions aren’t bad, at certain times of day, usually in lower light, I would catch an image reflection off the inner lens – usually the faint visage of my glorious schnoz (I noted the same effect on a competitor Pinlock shield too). It’s not a major annoyance, and certainly less distracting than the fogging it eliminates.

I found the biggest issue with the extra visor is keeping things clean. If not careful, grime can get stuck inside the layers after swapping out lenses – particularly during dusty conditions. Also, it should come as no surprise that the Pinlock also doesn’t magically keep the outer shield free of the usual muck and debris found on the road. For example, riding up and down the Pacific Coast my visor still “fogged” as the exterior of the shield got coated with salt spray.

I toggled between two lens tints, Clear and Dark Smoke (Amber, Light Smoke and Yellow are also available). Running the Dark Smoke lens transforms the shield into a fully tinted visor – and at first glance it looks like a tinted visor from the exterior too. I found utilizing the Pinlock visor with two lens inserts far more convenient than running separate clear and tinted faceshields. On short rides I’d attach either the tinted or clear lens, depending on conditions. For longer journeys I’d tuck the spare lens in a backpack or tankbag, where it’s less cumbersome to stow away – as it’s flexible and can lay flat. The lens surface isn’t as scratch-resistant as a regular shield, however, so it requires more care in storage. Swapping out the lenses, by the way, adds only a marginal amount of time compared to the regular shield change (thankfully pretty quick on the Shoei).

Shoei Pinlock visor
The CW-1 Pinlock Visor makes a high-end Shoei helmet even safer and more comfortable - a worthwhile upgrade.
The Shoei CW-1 Pinlock Visor requires precise fit to work correctly, as a small gap in the gasket-like seal will spoil its fog-stopping capabilities. Yet my test unit proved quite durable, and regrettably was crash tested as well. I suffered a mean get-off this past summer, which scratched up my Pinlock shield pretty bad (not to mention busted up my collarbone and plenty of ribs). It wasn’t until closer examination of my destroyed Shoei RF-1100 that I appreciated the severity of my crash. Out of curiosity I popped off the CW-1 Pinlock visor and slapped it on my unmarred Shoei Qwest to see if it still functioned. The shield kept the fog out on a short brisk ride, though the scratches made it unusable.

So although my visor has now been retired to the crashed gear heap (sigh…), I’d rate the CW-1 Pinlock Visor a sound investment. The clear visor itself retails for $52.99, with the CW-1 Pinlock lenses ringing in at $34.99 apiece. While it’s not a cheap upgrade, it’s a wise investment – particularly for a high-end lid like a Shoei. Not only does it work, the Pinlock shield corrects the one complaint I logged in my RF-1100 and Qwest helmet reviews – their propensity to easily fog up. In fact, right now, I’d rate my Shoei Qwest with CW-1 Pinlock Visor my absolute favorite riding helmet (though I got plenty helmets to test in 2012, not the least of which being the Pinlock-standard Shoei Neotech modular helmet).

Bottom line, the Shoei CW-1 Pinlock Visor delivers as advertised. It nullifies a dangerous distraction, thus making a top-shelf helmet even safer. It’s worth the extra cash for the consumer, particularly for those folks who ride in colder climes.

The Shoei CW-1 Pinlock Visor is available at Motorcycle Superstore with MSRP: $52.99
Shoei CW-1 Pinlock lenses MSRP: $34.99
Recent Street Bike Gear Reviews
Arai RX-7 GP Helmet Review 2015
MotoUSA's contributing editor reports on putting his Arai RX-7 Corsair through another year of use in this helmet review.
Book Review: FORKS by Allan Karl
We review Allan Karl's book "FORKS: A Quest for Culture, Cuisine and Connection," an account of one man's three year ride around the world.
On Any Sunday: The Next Chapter Review
Dana Brown's "On Any Sunday: The Next Chapter" picks up a theme first introduced by his father, Bruce Brown, more than 40 years ago, profiling current day motorcyclists and the sport they love.
Chrome Motor Barrage Backpack Review
Chrome Industries introduces a handful of new items geared to motorcycle riders, one being the Motor Barrage Rolltop Backpack, designed to stand up to abuse and provide plenty of storage space.
Arai Defiant Chopper Helmet Pro Shade Review
After wearing it during the summer riding season, we post our findings on the Arai Defiant Chopper Helmet along with the company's Pro Shade System in this motorcycle helmet review.
Kali Protectives Naza Carbon Helmet Review
The Kali Naza Carbon full-face street helmet features new motorcycle helmet technology alongside up-spec materials such as carbon fiber and Kevlar, all offered at a reasonable price.
Shoei Helmets Related Articles

Login or sign up to comment.

GreenRocket   May 29, 2012 12:34 PM
Thanks Bart! I've ordered both the visor and lens, in clear. Sloride- I've always used a big, old sock to store my tinted visor in when I'm touring.
MCUSA Bart   May 8, 2012 09:07 AM
sloride, bummer about the inserts getting ruined. They are pretty delicate. I usually tuck mine in a tank bag or backback when I'm heading out on a long trip.

GreenRocket, I believe Shoei does make a Pinlock visor for the CX-1V. They can be purchased at our sister site, Motorcycle Superstore,at the following link. http://www.motorcycle-superstore.com/1/1/69/4023/ITEM/Shoei-Clear-Shield-with-Pinlock-Pins-for-CX-1V-Helmet.aspx
sloride   May 1, 2012 05:02 PM
I also have enjoyed using the Pin Lock inserts on my Shoei RF1100 helmet. However I ruined two inserts when I stored them in my tailpack face to face in one of the cardboard folders they come in. The friction of thee two rubbing together over a few thousand miles created scratches in both. What do you recommend for storing the inserts in when travelling? Thanks.
GreenRocket   May 1, 2012 04:53 PM
At the Long Beach show I asked the Arai helmet expert (I think it was Bruce Porter) about what would be the best solution for a fogged up visor and he highly recommended the Pinlock system. Will Shoei be offering the pinlock on previous model shields also or just the newest ones? My TZR takes the CX-1V visor.