Fantasy Racing Fantasy Superbike begins 2/28/2010 – Sign Up Today

Shop for Motorcycle Parts, Gear & Apparel at Motorcycle Superstore

Tour Master Synergy Heated Pant Liner Review

Thursday, November 05, 2009
Font Size: small text medium text large text
RSS Feeds
Tour Master Synergy Heated Pant Liner
For bikers that like to ride all year 'round, Tour Master's Synergy Electric Heated Full Pant Liner might be your new best friend.
Just because temps are dropping and the winds are blowing outside, I’m not ready to garage the bike and call it a season just yet. But riding cold isn’t the funnest thing in the world to do and cold can drain a rider’s energy fast. For those who refuse to let frosty weather get them down, you have an ally in Tour Master’s Synergy Electric Heated Full Pant Liner.
 
The pant liner’s look like a thick pair of black sweats. The outside shell is made of smooth Ripstop Nylon while the inside has a soft, taffeta lining. In between the two layers is 60 gm Polyfill insulation to aid in heat retention and carbon fiber heating elements that are spread throughout the pants. They easily fit under a pair of snug-fitting riding pants, are very comfortable and fairly lightweight. A Men’s Large (34-36) fit me perfectly and I barely noticed them under my regular riding pants. The Synergy Full Pant Liner has an elastic waistband and a convenient zipper on the front for when it’s time for a pit stop.
 
The heated pant liner comes with a Solid State, electronically controlled thermostat. A convenient nylon strap that Velcros around your thigh is included so you can clip the heating controls easily within reach, but be careful because the clip slips out easily. Two big buttons make it easy to turn off and on, while small High, Medium, and Low lights let you know what setting you’re on. The system is easy to plug together and the buttons are simple to use even with gloved hands.
 
The one trick to the pants is that you’ll need to hook the power lead wiring harness to your motorcycle’s standard 12-volt battery. In my case, I had to remove five bolts to take the small pillion pad and seat off the 2010 Honda Fury to access the battery. Hardest part of the installation was getting the stubborn bolt on the Fury’s battery loose. Besides that, it was cake. Once I got it off, the leads slip right on, I
Hooking up the lead wiring harness of the heated pant liners to the Fury.
Connect the power lead wiring harness that comes with the pant liner to your motorcycle's 12-volt batttery and you're ready to plug in and reap the benefits.
replaced the bolts, ran the wires under the seat and put the seat back on. Total time, ten minutes tops, and all it required was an Allen wrench for the bolts on the seat and a Phillips screwdriver for the battery screws.
 
First time I turned it on, I set it on high and had heat on my thighs by the time I backed out of the garage and took off. The next morning I put it on the 'Low'setting to see how fast it heated up and I didn’t feel any heat right away, so I switched it to 'High'. I recommend setting it on 'High' first, then adjusting it to the proper temp. On the 'High' setting, the hottest spots are on the tops of the thighs and the inside of the calves. It was in the mid-40s this morning on my 30-mile ride to work, but from the waist down I was warm and toasty.

Being physically connected to the bike takes a little getting used to. Be sure to hook up the Synergy power lead before you put the keys in the ignition and turn the bike on. If you don’t, it could cause a power surge that could damage the vehicle’s circuitry and the garment’s heating elements. Also be sure to jump on the bike first before you plug in or your feet will snag the wires when you try to mount the bike. Have the temp controls already plugged into the pants and then after you’re comfortable in the saddle, plug the temp controls into the power lead wiring harness. Push the green ‘On’ button, choose how hot you want it, then scoff at the cold around you.

The Synergy Heated Pant Liner is machine washable, with stipulations. First disconnect the temperature controls, then machine wash in cold on gentle or delicate. Don’t throw them in the dryer, but air dry instead. Also, don’t soak them in the washer for an extended period and don’t wring dry, as either could damage the heating elements.

For full-body warmth, the liner can be connected to a Synergy Jacket Liner and Synergy Heated Leather Gloves. Talk about having confidence in your product, the Synergy pant liner comes with a three-year limited warranty that covers the temp control, heating elements and electrical connectors. Granted, they are seasonal wear, but if I could get three winters of riding out of them, I’d be stoked. Now that I’ve tried a set, I wonder why in the hell I didn’t hook up a pair of these a long time ago.
 
MSRP - $152.99 at the Motorcycle Superstore
Available in sizes X-Small to 4-XL
Check out more Tour Master Heated Gear!
Recent Cruiser Product Reviews
Custom Motorcycles Book Review
Spanish photographer Miguel Tres provides insight into biker culture and lifestyle through his photography in the book Custom Motorcycles.
H-D 3 4 Helmet with Sun Shield Review
We sample the Harley-Davidson 3/4 Helmet with a retractable Sun Shield - no need for two faceshields on this motorcycle helmet.
Todays Top Custom Bike Builders Review
Motorcycle USA reviews S&S Cycle presents Today's Top Custom Bike Builders, a book that showcases the 50 custom motorcycles built in honor of S&S Cycle's 50th anniversary and features the photography of Michael Lichter.
2009 Tour Master Coaster II Jacket Review
We've ridden with the Tour Master Coaster II Leather Jacket through the Mojave Desert and rainy Pacific Northwest. How does it fare?
Comments
BG - tourmaster pants  November 17, 2009 12:32 PM
Do you know if the tourmaster can be used with gerbing control and jacket liner?
bryan harley - pant size  November 6, 2009 10:20 AM
Hey Lefty,

My pant size is the same. I wear a 34-36 waist. The liner stretches to right above the ankles, so they definitely tuck inside the boot.

Thanks for the input Desmo. I've only been wearing them while riding upright on the Honda Fury, so riding position should be taken into consideration.
Desmolicious - Sizing  November 6, 2009 10:17 AM
Lefty, I have found they run true to size. So if you're a 34, you'd get a 34-36. They go inside your riding boots as they are meant to fit snug to provide warmth. Electric/heated clothing only works well if it is snug.

P.S. if you were only to get one piece of heated clothing it makes much more sense to get their heated jacket liner. You stay much warmer by heating your core, as the blood gets circulated to the rest of your body from the core. I have both the jacket liner and the pants and find I use the jacket liner much more. If you do get it, make sure you get the one with the full sleeves not the vest.
Lefty - tourmaster Synergy pant liner  November 6, 2009 04:52 AM
When you mentioned that size large 34-36 fit you, you didn't say what size pants you wear. Also would be interested in knowing what the inseam length is and if they would fit over a riding boot or if they would be worn inside the boot.
Desmolicious - Not very comfy on sport bikes  November 5, 2009 05:21 PM
I have a pair, and found that if you ride sport style bikes where your knees are bent more, you can feel the wires on your kneecaps after a while. It can get quite uncomfortable.

Add a Comment
Your Name:

Title:

Comments:

MotoUSA Magazine
Get your copy FREE!
Email Newsletter
Sign-up for our monthly update.
MotoUSA Mobile
Optimized for your mobile device.
Motorcycle Superstore
Shop with confidence - #1 rated.

Motorcycle USA covers the world of motorcycles with breaking motorcycle news, motorcycle reviews and motorcycle race coverage. When you can’t afford to miss a single event in the world of motorcycling, trust Motorcycle USA to bring you the inside scoop on the two-wheeled world.


Copyright 1996-2010 Motorcycle USA, LLC. All rights reserved.