Drag site icon to your taskbar to pin site. Learn More

Bill Warner Reaches 278.6 mph at Texas Mile

Friday, October 29, 2010
Bill Warner
Bill Warner and his crew set a speed of 278.6 mph during the last day at the Texas Mile.
During a recent run at the Texas Mile, rider Bill Warner set a new speed record aboard a 1299cc turbocharged Suzuki Hayabusa of 278.6 mph, eclipsing the previous record by 5.3 mph and earning his machine the status of the "World’s Fastest Streetbike."

The Texas Mile is an annual event that takes place in Goliad, Texas. A total of 76 motorcycles and 173 cars were on hand. Participants had a mile to reach peak velocity and another half mile to stop their machines.

Warner gradually built up his speed during the three days prior to taking the new record. On Saturday he posted a time of 270.7 mph, beating the old record of 261.5 mph set in March of 2010. "I gradually made changes to the bike's existing setup to maximize the acceleration in each gear, trying to utilize all of the available horsepower," said Warner. On the third and final day of the event Warner’s changes paid off, and despite limited runs the 41-year-old was the fastest.

"The entire weekend, all three days, I only was able to make five runs,” said Warner. “I usually run four or five per-day, so five passes in three days is not much time to get everything dialed in. The Texas Mile track is very smooth and wide, but there is not much room to shut down. More than once, I took a wild ride off the end of the track trying to get the bike stopped.”

Bill Warner
In the two days leading up to breaking the record Warner made slight adjustments to his bike after each run.
Adding tremendous difficulty to the achievement was the wind which picked up during the morning of each competition.

"The wind picked up significantly after 9:30 every morning,” Warner said. “It took two runs (one on Friday and one on Saturday) to learn to stay the hell off the track when those side winds picked up. There was one gust that laid the bike over so bad I could have put a knee down, but that's not a good idea at 240 mph while trying to go straight.”

But on the final day Warner and his motorcycle settled into a groove, allowing them to rocket down the industrial airport with mind-numbing speed.

"The early-morning pass on Sunday that set the record started with my best launch ever,” Warner said. “The bike got squirrely, skidded side to side and then she finally hooked up. It felt like I was shot out of a cannon! The bike stayed perfectly vertical for the entire run. It was so smooth it felt slow, if that makes any sense. Shutdown was tough, but fun, the bike screeching, sliding and hopping off the track."

One of the many individuals impressed by Warner’s run was Broc’s Performance President, Broc Davidson. A member of the 200 club himself, Davidson has been shocked by Warner’s overall work ethic and his ability to meet goals.

"The thing that strikes me is that I didn't know Bill before this year, but he came highly recommended,” said Davidson. “With methodical, consistent, record-breaking runs, he's proven his skill to the point where I sit back in awe and wait to see the next goal het sets outs to break."

Specifications, Parts and Suppliers:
 
Wild Brothers Racing 1299cc, Turbocharged,
2005 Suzuki GSX1300R Hayabusa

Top Speed: 278.6 mph
Estimated Worth: $90,000
The worlds fastest streetbike
World's fastest streetbike: a 1299cc Turbocharged Hayabusa.

Power: 650 hp
Torque: 314 lbs.-ft.

Engine:
Type: Liquid-cooled inline-4
Bore x Stroke: 81mm x 63mm
Displacement: 1299cc
Compression: 8.5:1
Redline: 12,000 rpm
Cylinder head: Stock
Valve train: DOHC, 16v
Cylinder head modifications: Ward Performance
Cams: Web Cam
Valves: Ferrea
Cam chain tensioner: Brock's Performance
Cylinder: Stock, aluminum, linerless design   
Cylinder bore coatings: Millennium
Pistons: MTC
Rings: MTC
Pins: MTC
Circlips: MTC
Crankshaft modifications: Falicon
Connecting rods: Crower
Main bearings: Stock
Big end bearings: Stock
Crankcase: Stock
Crankcase: modifications: Harry's Machine
Oil pan baffle: Brock's Performance
Transmission: 6-speed constant-mesh
Transmission modifications: R&D
Transmission bearings: Worldwide Bearings
Transmission coatings: Power-Coat
Shift shafts: Brock's Performance
Clutch: MTC
Clutch type: wet, multi-stage lockup
Induction: Turbocharging
Turbo system: RCC Turbos
Turbocharger: Garrett
Heat exchanger: RCC Turbos
Ignition: Stock
Ignition amplifier: NLR
Spark plugs: NGK
ECU: Stock
ECU modifications: ECU editor
Fuel injection: Stock
Secondary injection: RCC Turbos
Fuel: VP Racing Fuels C16
Sensors: EGT, Zip Sensors
Data acquisition: Aim Sports
Boost controller: NLR
Secondary injector system: Microtech
Exhaust: RCC Turbos
Plumbing: Earl's
Gaskets: Cometic
Seals: Stock
Oil: Alisyn
Oil Filter: K&P Engineering
Fasteners: Heads Up Performance
Starter pin set: Brock's Performance

Chassis:
Frame: Stock
Frame modifications: McIntosh, raked +5 degrees
Subframe: McIntosh
Swingarm: McIntosh, 2-5 in. over stock
Wheelbase: 63 in.
Drive chain: Brock's Performance/EK
Chain lubricant: Alisyn
Sprockets: Vortex
Front wheel: BST carbon fiber, 3.5 in. x 17 in.
Rear wheel: BST carbon fiber, 8.5 in. x 18 in.
Wheel bearings: Worldwide Bearings
Front tire: Continental 120/70x17 Race Attack
Rear tire: Continental 240/40x18 Race Attack Custom
Tire warmer: Woodcraft
Brake master cylinder: ISR
Brake calipers: Stock
Brake lines: Spiegler
Brake pads: Spiegler/Carbone Lorraine
Brake rotors: Spiegler/ABM
Brake fluid: Valvoline Dot 4
Front suspension: Stock 2008 Hayabusa, Ohlins springs
Steering damper: Ohlins
Rear suspension links: Brock's Performance
Rear shock: Ohlins TTX
Bodywork: Custom
Fuel tank: Custom
Fuel capacity: 3.5 gallons
Paint: Color Concepts Auto Refinishing
Seat height: 28"
Weight: 590 pounds

http://www.brocksperformance.com/

Login or sign up to comment.

Comments
ajmal p -but  January 19, 2011 04:28 AM
why zx14r,being 100cc greater than busa couldnt get a place on the top of the list?
MUCSA Editorial -Photo  December 9, 2010 08:38 AM
Putter Power Media sent out the press release for this article with accompanying photos. Please email us at info@motorcycle-usa.com and we can resolve.
Kat Hagen -Photographer  December 9, 2010 07:15 AM
Who is Putter Power Media, and why is their company name on my photo?
Craven Morehead -Way 2 go dude!  October 30, 2010 11:32 AM
Nice job. That takes talent and balls, much more than I have.